Reverse Osmosis systems (R/O), are designed to be wall mounted above the laundry sink or similar and connects to your cold water laundry tap. The R/O System silently and efficiently purifies the water supply to provide the cleanest and best tasting water you’ve ever experienced.
Reverse Osmosis is perfect for any situation that requires the supply of ultra pure clean water. Usage includes: Home / Office / Aquariums and any beverage maker.
ALL our systems use the Highest Quality QMP US housings, standard size 10 inch (9 ¾" (248mm)and meet Australian Standards AS 3497 also NSF certified (worlds leading certification authority) NSF/ANSI standard 042 certification.
What does it remove?
This system will efficiently and effectively remove impurities in the water including rust, dirt and scale as well as chlorine, and most chemicals, herbicides and pesticides and harmful bacteria such as Crytosporidium and Giardia.
1st stage removes sediment such as dirt and rust.
2nd stage filters chemicals and odours out of the water supply.
How do they work?
First, water passes through a 1 micron sediment cartridge, which removes large particles like silt, sand, rust, dirt, etc.
Second, the water passes through a carbon 1 micron cartridge that removes chlorine, some pesticides, herbicides and toxic chemicals.
Thirdly, water is forced through the Filmtec membrane. This filters down to a molecular level (1/10,000/micron). Any water that doesn’t filter through the membrane is impure water and is dumped down the drain. The PURE WATER is then stored in countainers.
Wall mount reverse osmosis systems are designed to be portable and typically mounted in the laundry.
What do I get?
- Filter system - twin housings (Heavy Duty Australian Standards approved. - AS 3497) Stainless Steel Mounting bracket
- Genuine Filtec Membrane.
- Cartridges – 1 x 1 micron Polly spun sediment 1x 1 micron carbon block in wrappers
- Hose/Tube – 2 x 2 metre colour coded.
- Fittings – to allow easy connection to laundry tap.
- Instructions – comprehensive 6 page guide to make self installation easy.
How much does it cost?
$220.00 includes free delivery (delivery is insured and registered)
How often do I need to replace cartridges and membranes?
- Micro sediment cartridges should be changed as needed (typically after12 months).
- Carbon cartridges must be changed every 12 months.
- Filmtec membranes should be replaced every 3 to 5 years depending on use.
Why does Filter Wizard use Thin Film Composite (TFC) membranes?
We use TFC membranes rather than Cellulose Triacetate (CTA) membranes because they are simply more durable, being made of a plastic-like rather than a paper-like material. People using CTAs spend more money in the long run because they need to buy replacement membranes typically every 1 to 3 years, whereas TFC membranes will typically last 3 to 5 years.
Our aim is to save you money by insisting on higher quality components.
Reverse osmosis performance chart
Reverse Osmosis removes the entire spectrum of drinking water contaminants.
| Aluminium | up to 98% | Ammonium | up to 97% |
| Arsenic | up to 97% | Barium | up to 96% |
| Bicarbonate | up to 99% | Bromide | up to 99% |
| Cadmium | up to 98% | Calcium | up to 97% |
| Chloride | up to 99% | Chromium | up to 96% |
| Copper | up to 97% | Cyanide | up to 97% |
| Fluoride | up to 98% | Iron | up to 99% |
| Lead | up to 97% | Sodium | up to 99% |
| Magnesium | up to 99% | Mercury | up to 96% |
| Nickel | up to 97% | Nitrate | up to 95% |
| Potassium | up to 99% | Selenium | up to 95% |
| Silica | up to 95% | Silver | up to 95% |
| Sulphate | up to 99% | Zinc | up to 97% |
Click here to contact us