The AQUA-TEK 5000 Reverse Osmosis Water Filter is our PREMIUM top of the range reverse osmosis water filter system. Produces high quality purified water by a membrane separation process. The reverse osmosis process separates suspended and dissolved solids to waste and produces high purity water. Water from the AQUA-TEK 9000 will simply taste superb!
Reverse osmosis purification includes reduction of salts (chlorides etc.), metals, hardness, chemicals, chlorine, turbidity and taste /odour.
The purifier is a total system with all components supplied; RO unit, pre and post filters, storage tank and dispensing faucet. An automatic shut off valve conveniently shuts down the incoming water when the tank is full. The tank holds approx. 9 litres of water and the Purifier produces 150 litres per day- application dependent.
This system is excellent for high dirt load or high useage applications.
ALL our systems use the Highest Quality MADE IN USA housings, standard size 10 inch (9 ¾" (248mm)and meet Australian Standards AS 3497 also NSF certified (worlds leading certification authority) NSF/ANSI standard 042 certification.
WE consider this system to be the best REVERSE OSMOSIS water filter system available to pruduce PURE DRINKING WATER.
About the 5 Stage filtration process.
This system will efficiently and effectively remove impurities in the water including rust, dirt and scale as well as chlorine, and most chemicals, herbicides and pesticides and harmful bacteria such as Crytosporidium and Giardia.
1st stage removes sediment such as dirt and rust.
2nd stage filters chemicals and odours and Dirt out of the water supply.
3rd Extruded Carbon Block 1 micron - removes any residual chlorine, tastes & odors, plus compounding pre-filters' efficiency and extending membrane's life. standards..
4th Stage removes heavy metals (TDS) and FLUORIDE.
5th stage Polishes water ready for drinking direct from storage tank.
FLUORIDE is only removed thru REVERSE OSMOSIS PURIFICATION.
What do I get?
- 5 Stage Reverse Osmosis Water Filter System - Twin housings (Heavy Duty Australian Standards approved. - AS 3497)
Stainless Steel Mounting bracket. - Genuine Filmtec Membrane.
- Tank , Stainless Steel powder coated.
- Cartridges – 1 x 1 micron Polly spun sediment
2 x 1 micron carbon block in wrappers. - Hose/Tube – 4 x 2 metre colour coded.
1 x Adjustable PLV (Pressure Limiting Valve). - Fittings – to allow easy connection to pipework.
- Ceramic Disk Faucet (Tap) ,choice of 2. as about our lead free FAUCET.
- Instructions – comprehensive 12 page guide to make self installation easy.
- Filter size - H 43 cm W 46cm D 15 cm, the system can be wall mounted on simply lay flat on shelf or stand upright.
- Tank Size -H 35 cm W 23cm D 23 cm, the Tank will sit upright or lay on side, comes with a stand to sit in either position.
How much does it cost?
Price - $450.00, includes FREE Delivery Australia Wide. (SPECIAL THIS MONTH)
WATER FILTER INSTALLATION SERVICES
Filter Wizard Water Purifiers (servicing Brisbane, Caboolture, Hinterland, Sunshine Coast , Redcliffe and Bribbie Island) provide the complete installation and maintenance service for all of the residential water filters and commerciall water filter systems that we supply. We can also provide ongoing services for all other brands of water filter systems for a fraction of the costs of your current provider. All Filter Wizard Water Purifiers maintenance is carried out by our fully qualified technicians who have many years experience in installation and servicing.
We make installation a breeze so you can enjoy clean water.
$120.00 to install Aquatek 3000 and 2000 under sink water filter systems
price includes labour and any parts.
How often do I need to replace cartridges and membranes?
- 1st stage cartridge should be changed as needed (typically after 12 months).
- 2nd and 3rd stage cartridges must be changed every 12 months.
- 5th Stage filter should be replaced every 12 months.
- Filmtec membranes should be replaced every 3 to 5 years depending on use.
Why does Filter Wizard use Thin Film Composite (TFC) membranes?
We use TFC membranes (FILMTEC) rather than Cellulose Triacetate (CTA) membranes because they are simply more durable, being made of a plastic-like rather than a paper-like material. People using CTAs spend more money in the long run because they need to buy replacement membranes typically every 1 to 3 years, whereas TFC membranes will typically last 3 to 5 years.
Our aim is to save you money by insisting on higher quality components.
Reverse osmosis performance chart
Reverse Osmosis removes the entire spectrum of drinking water contaminants.
| Aluminium | up to 98% | Ammonium | up to 97% |
| Arsenic | up to 97% | Barium | up to 96% |
| Bicarbonate | up to 99% | Bromide | up to 99% |
| Cadmium | up to 98% | Calcium | up to 97% |
| Chloride | up to 99% | Chromium | up to 96% |
| Copper | up to 97% | Cyanide | up to 97% |
| Fluoride | up to 98% | Iron | up to 99% |
| Lead | up to 97% | Sodium | up to 99% |
| Magnesium | up to 99% | Mercury | up to 96% |
| Nickel | up to 97% | Nitrate | up to 95% |
| Potassium | up to 99% | Selenium | up to 95% |
| Silica | up to 95% | Silver | up to 95% |
| Sulphate | up to 99% | Zinc | up to 97% |